HP ZBook Power G10 User Manual

3. Detach the NFC module (3) from the computer. The NFC module is attached with adhesive.
To install the NFC module, reverse this procedure.
Touchpad
To remove the touchpad, use this procedure and illustration.
Table 5-9
Touchpad description and part number
Description Spare part number
Touchpad for use in models without NFC N60057-001
Touchpad for use in models with NFC N60058-001
Touchpad cable (available in the Cable Kit) N56092-001
Touchpad conductive tape (available in the Plastic Kit) N06911-001
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 37).
2. Remove the bottom cover (see Bottom cover on page 37).
3. Remove the battery (see Battery on page 39).
Remove the touchpad:
1. Disconnect the NFC antenna cable from the ZIF connector (1) on the NFC module.
2. Detach the NFC antenna (2) from the computer. The antenna is attached with adhesive.
Touchpad
49

HP ZBook Power G10 Specifications

General

Operating System	Windows 11 Pro
Processor	Up to Intel Core i9-13900H
Graphics	NVIDIA RTX A2000 Laptop GPU
Display	15.6" diagonal, FHD (1920 x 1080) or UHD (3840 x 2160), IPS, anti-glare
Memory	Up to 64 GB DDR5
Storage	Up to 2 TB PCIe NVMe SSD
Battery	83 Wh Li-ion polymer
Ports	headphone/microphone combo
Wireless	Intel Wi-Fi 6E AX211 (2x2) and Bluetooth 5.3