HP ZBook Power G10 User Manual

To install the speakers, reverse this procedure.
Heat sink
To remove the heat sink, use these procedures and illustrations.
Table 5-15
Heat sink descriptions and part numbers
Description Spare part number
For use in models with discrete graphics memory N55740-001
For use in models with UMA graphics memory N55741-001
Thermal pad kit (includes three pads) N58326-001
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 37).
2. Remove the bottom cover (see Bottom cover on page 37).
3. Disconnect the battery cable from the system board (see Battery on page 39).
Remove the heat sink:
1. In the order indicated on the heat sink, remove the six Phillips M2.0 × 4.0 screws (1) that secure the
heat sink to the system board.
58
Chapter 5 Removal and replacement procedures for authorized service provider parts

HP ZBook Power G10 Specifications

General

Operating System	Windows 11 Pro
Processor	Up to Intel Core i9-13900H
Graphics	NVIDIA RTX A2000 Laptop GPU
Display	15.6" diagonal, FHD (1920 x 1080) or UHD (3840 x 2160), IPS, anti-glare
Memory	Up to 64 GB DDR5
Storage	Up to 2 TB PCIe NVMe SSD
Battery	83 Wh Li-ion polymer
Ports	headphone/microphone combo
Wireless	Intel Wi-Fi 6E AX211 (2x2) and Bluetooth 5.3