HPE FlexNetwork 5510 HI Series Security Configuration Guide

142
Step
Command
Remarks
device.
Logging out portal users
Logging out a user terminates the authentication process for the user or removes the user from the
authenticated users list.
To log out users:
Step
Command
1. Enter system view.
system-view
2. Log out IPv4 portal users.
portal delete-user
{ ipv4-address |
all
|
interface
interface-type
interface-number }
3. Log out IPv6 portal users.
portal delete-user
{
all
|
interface
interface-type interface-number |
ipv6
ipv6-address }
Configuring the local portal Web server feature
IMPORTANT:
This feature is available in Release 1121 and later.
To perform local portal authentication for users, perform the following tasks:
• Configure a local portal Web server.
• Configure a name for the portal Web server and specify a local IP address of the device as the
server's URL.
• Enable portal authentication on the user access interface.
• Specify the portal Web server on the portal-enabled interface.
During local portal authentication, the local Web portal server pushes authentication pages to users.
You must customize the authentication pages and upload them to the device. On the device, specify
an authentication page file as the default authentication page file for local portal authentication.
Customizing authentication pages
Authentication pages are HTML files. Local portal authentication requires the following
authentication pages:
• Logon page
• Logon success page
• Logon failure page
• Online page
• System busy page
• Logoff success page
You must customize the authentication pages, including the page elements that the authentication
pages will use, for example, back.jpg for authentication page Logon.htm.
Follow the authentication page customization rules when you edit the authentication page files.

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English