476
Current SAK KI (KN) : 85E004AF49934720AC5131D300000003 (3)
Previous SAK status : N/A
Previous SAK AN : N/A
Previous SAK KI (KN) : N/A
Live peer list:
MI MN Priority Capability Rx-SCI
85E004AF49934720AC5131D3 1216 5 3 00E00100000A0006
Troubleshooting MACsec
Symptom
The devices cannot establish MKA sessions when the following conditions exist:
• The link connecting the devices is up.
• The ports at the ends of the link are MACsec capable.
Analysis
The symptom might occur for the following reasons:
• The ports at the link are not enabled with MKA.
• A port at the link is not configured with a preshared key or configured with a preshared key
different from the peer.
Solution
To resolve the problem:
1. Enter interface view.
2. Use the display this command to check the MACsec configuration:
ï‚¡ If MKA is not enabled on the port, execute the mka enable command.
ï‚¡ If a preshared key is not configured or the preshared key is different from the peer, use the
mka psk command to configure a preshared key. Make sure the preshared key is the same
as the preshared key on the peer.
3. If the problem persists, contact Hewlett Packard Enterprise Support.
To Next Page
Loading...
Need help?
General