33
• RADIUS server unreachable notification—The RADIUS server cannot be reached. RADIUS
generates this notification if it cannot receive any response to an accounting or authentication
request within the specified RADIUS request transmission attempts.
• RADIUS server reachable notification—The RADIUS server can be reached. RADIUS
generates this notification for a previously blocked RADIUS server after the quiet timer expires.
• Excessive authentication failures notification—The number of authentication failures to the
total number of authentication attempts exceeds the specified threshold.
You can configure SNMP parameters to control the output of these SNMP notifications. For more
information, see Network Management and Monitoring Configuration Guide.
To enable SNMP notifications for RADIUS:
1. Enter system view.
system-view
N/A
2. Enable
for RADIUS.
snmp-agent trap enable radius
[
accounting-server-down
|
accounting-server-up
|
authentication-error-threshold
|
authentication-server-down
|
authentication-server-up
] *
By default, all types of SNMP
notifications are enabled for
RADIUS.
Displaying and maintaining RADIUS
Execute display commands in any view and reset commands in user view.
Display the
configuration.
display radius scheme
[ radius-scheme-name ]
Display RADIUS packet statistics.
display radius statistics
Clear RADIUS statistics.
Configuring HWTACACS schemes
Configuration task list
(Required.) Creating an HWTACACS scheme
(Required.) Specifying the HWTACACS authentication servers
(Optional.) Specifying the HWTACACS authorization servers
(Optional.) Specifying the HWTACACS accounting servers
(Required.) Specifying the shared keys for secure HWTACACS communication
(Optional.) Specifying a VPN for the scheme
(Optional.) Setting the username format and traffic statistics units
(Optional.) Specifying the source IP address for outgoing HWTACACS packets
(Optional.) Setting HWTACACS timers
(Optional.) Displaying and maintaining HWTACACS
To Next Page
Loading...
