HPE FlexNetwork 5510 HI Series Security Configuration Guide

351
Task
Command
Remarks
[ { public-key keyname | server-pki-domain
domain-name } | source { interface
interface-type interface-number | ipv6
ipv6-address } ] *
Establishing a connection to an SCP server based on Suite B
Task
Command
Remarks
Establish a
connection to an SCP
server based on Suite
B.
• Establish a connection to an IPv4 SCP server
based on Suite B:
scp server [ port-number ] [ vpn-instance
vpn-instance-name ] { put | get }
source-file-name [ destination-file-name ]
suite-b [ 128-bit | 192-bit ] pki-domain
domain-name [ server-pki-domain
domain-name ] [ prefer-compress zlib ]
[ source { interface interface-type
interface-number | ip ip-address } ] *
• Establish a connection to an IPv6 SCP server
based on Suite B:
scp ipv6 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ -i interface-type
interface-number ] { put | get } source-file-name
[ destination-file-name ] suite-b [ 128-bit |
192-bit ] pki-domain domain-name
[ server-pki-domain domain-name ]
[ prefer-compress zlib ] [ source { interface
interface-type interface-number | ipv6
ipv6-address } ] *
Available in user view.
The client cannot establish
connection
s to both IPv4
and IPv6 SCP servers.
Specifying algorithms for SSH2
IMPORTANT:
This feature is available in Release 1121 and later.
Perform this task to specify the following types of algorithms that the SSH2 client and server use for
algorithm negotiation during the Stelnet, SFTP, or SCP session establishment:
• Key exchange algorithms.
• Public key algorithms.
• Encryption algorithms.
• MAC algorithms.

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English