HPE FlexNetwork 5510 HI Series Security Configuration Guide

47
Configuring accounting methods for an ISP domain
Configuration prerequisites
Before configuring accounting methods, complete the following tasks:
1. Determine the access type or service type to be configured. With AAA, you can configure an
accounting method for each access type and service type.
2. Determine whether to configure the default accounting method for all access types or service
types. The default accounting method applies to all access users. However, the method has a
lower priority than the accounting method that is specified for an access type or service type.
Configuration guidelines
When configuring accounting methods, follow these guidelines:
• FTP, SFTP, and SCP users do not support accounting.
• Local accounting does not provide statistics for charging. It only counts and controls the number
of concurrent users who use the same local user account. The threshold is configured by using
the access-limit command.
Configuration procedure
To configure accounting methods for an ISP domain:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter ISP domain view.
domain
isp-name N/A
3. Specify the default
accounting method
for all
types of users.
accounting default
{
hwtacacs-scheme
hwtacacs-scheme-name
[
radius-scheme
radius-scheme-name ]
[
local
] [
none
] |
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
hwtacacs-scheme
hwtacacs-scheme-name ] [
local
]
[
none
] }
By default, the accounting
method is
local
.
The
none
keyword is not
supported in FIPS mode.
4. Specify the command
accounting method.
accounting command
hwtacacs-scheme
hwtacacs-scheme-name
By
default, the default
accounting method is used
for command accounting.
5.
Specify the accounting
method for LAN users.
accounting lan-access
{
local
[
none
] |
none
|
radius-scheme
radius-scheme-name [
local
] [
none
] }
By
default, the default
accounting method is used
for LAN users.
The
none
keyword is not
supported in FIPS mode.
6.
Specify the accounting
method for login users.
accounting login
{
hwtacacs-scheme
hwtacacs-scheme-name
[
radius-scheme
radius-scheme-name ]
[
local
] [
none
] |
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
hwtacacs-scheme
hwtacacs-scheme-name ] [
local
]
[
none
] }
By default, the default
accounting method is used
for login users.
The
none
keyword is not
supported in FIPS mode.
7.
Specify the accounting
method for portal users.
accounting portal
{
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
local
] [
none
] }
By default, the default
accounting method is used
for portal users.
The
none
keyword is not
supported in FIPS mode.

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English