HPE FlexNetwork 5510 HI Series Security Configuration Guide

211
Step
Command
Remarks
each user.
8. Specify the maximum
number of login attempts and
the action to be taken when a
user fails to log in
after the
specified number of
attempts.
password-control login-attempt
login-times [
exceed
{
lock
|
lock-time
time |
unlock
} ]
By default, the maximum number
of login attempts is 3 and a user
failing to log in after the specified
number of attempts must wait for
1 minute before trying again.
9. Set the number of days
during which a
user is
notifi
ed of the pending
password expiration.
password-control
alert-before-expire
alert-time
The default setting is 7 days.
10. Set the maximum number of
days and maximum number
of times that a user can log in
after the password expires.
password-control
expired-user-login delay
delay
times
times
By default, a user can log in three
times within 30 days after the
password expires.
11. Set the maximum account
idle time.
password-
control login
idle-time
idle-time
The default setting is 90 days.
Setting user group password control parameters
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2.
Create a user group and
enter user group view.
user-group
group-name
By default, no user group exists.
F
or information about how to
configure
a user group, see
"Configuring AAA."
3. Configure the password
expiration time for the user
group.
password-control aging
aging-time
By default, the password
expiration time of the user group
equals the global password
expiration time.
4.
Configure the minimum
password length for the user
group.
password-control length
length
By default, the minimum
password length of the user group
equals the global minimum
password length.
5. Configure the password
composition policy
for the
user group.
password-control composition
type-number
type-number
[
type-length
type-length ]
By default, the password
composition policy
of the user
group equals the global password
composition policy.
6.
Configure the password
complexity checking policy
for the user group.
password-
control complexity
{
same-character
|
user-name
}
check
By default, the password
complexity checking policy of the
user group equals the global
password complexity checking
policy.
7. Specify the maximum
number of login attempts and
the action to be taken when a
user in the user group fails to
log in
after the specified
number of attempts.
password-control login-attempt
login-times [
exceed
{
lock
|
lock-time
time |
unlock
} ]
By default, the login-attempt
policy of the user group equals the
global login-attempt policy.

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English