HPE FlexNetwork 5510 HI Series

36
To specify HWTACACS accounting servers for an HWTACACS scheme:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. E
nter HWTACACS
scheme view.
hwtacacs scheme
hwtacacs-scheme-name
N/A
3. Specify HWTACACS
accounting servers.
• Specify
the primary HWTACACS
accounting server:
primary accounting { host-name
| ipv4-address | ipv6
ipv6-address } [ port-number | key
{ cipher | simple } string |
single-connection |
vpn-instance
vpn-instance-name ] *
• Specify a secondary HWTACACS
accounting server:
secondary accounting
{ host-name | ipv4-address | ipv6
ipv6-address } [ port-number | key
{ cipher | simple } string |
single-connection |
vpn-instance
vpn-instance-name ] *
By default, no accounting server
is specified.
Two HWTACACS accounting
servers in a scheme, primary or
secondary, cannot have the same
combination of hostname, IP
address, port number, and VPN.
Specifying the shared keys for secure HWTACACS communication
The HWTACACS client and server use the MD5 algorithm and shared keys to generate the
Authenticator value for packet authentication and user password encryption. The client and server
must use the same key for each type of communication.
Perform this task to configure shared keys for servers in an HWTACACS scheme. The keys take
effect on all servers for which a shared key is not individually configured.
To specify a shared key for secure HWTACACS communication:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. E
nter HWTACACS scheme
view.
hwtacacs scheme
hwtacacs-scheme-name
N/A
3. Specify a shared key for
secure HWTACACS
authentication, authorization,
or accounting
communication.
key
{
accounting
|
authentication
|
authorization
}
{
cipher
|
simple
} string
By default, no shared key is
specified.
The shared key configured on the
device must be the same as the
shared key configure
d on the
HWTACACS server.
Specifying a VPN for the scheme
The VPN specified for an HWTACACS scheme applies to all servers in that scheme. If a VPN is also
configured for an individual HWTACACS server, the VPN specified for the HWTACACS scheme
does not take effect on that server.
To specify a VPN for an HWTACACS scheme:
Step
Command
Remarks
1. Enter system view.
system-view
N/A