HPE FlexNetwork 5510 HI Series

349
Task
Command
Remarks
• In non-FIPS mode, connect to the IPv6 SCP
server, and transfer files with this server:
scp ipv6
server [ port-number ] [
vpn-instance
vpn-instance-name ] [
-i
interface-type
interface-number ] {
put
|
get
} source-file-name
[ destination-file-name ] [
identity-key
{
dsa
|
rsa
} |
prefer-compress zlib
|
prefer-ctos-cipher
{
3des
|
aes128 | aes256
|
des
} |
prefer-ctos-hmac
{
md5
|
md5-96
|
sha1
|
sha1-96
} |
prefer-kex
{
dh-group-exchange
|
dh-group1
|
dh-group14
} |
prefer-stoc-cipher
{
3des
|
aes128 | aes256
|
des
} |
prefer-stoc-hmac
{
md5
|
md5-96
|
sha1
|
sha1-96
} ] * [
publickey
keyname |
source
{
interface
interface-type interface-number |
ipv6
ipv6-address } ] *
• In FIPS mode, connect to the IPv6
SCP server,
and transfer files with this server:
scp ipv6 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ -i interface-type
interface-number ] { put | get } source-file-name
[ destination-file-name ] [ identity-key rsa |
prefer-compress zlib | prefer-ctos-cipher
{ aes128 | aes256 } | prefer-ctos-hmac { sha1 |
sha1-96 } | prefer-kex dh-group14 |
prefer-stoc-cipher { aes128 | aes256 } |
prefer-stoc-hmac { sha1 | sha1-96
} ] *
[ publickey keyname | source { interface
interface-type interface-number | ipv6
ipv6-address } ] *
To transfer files with an SCP server in Release 1121 and later:
Task
Command
Remarks
Connect to the SCP
server, and transfer files
with the server.
• In non-FIPS mode, connect to the IPv4 SCP
server, and transfer files with this server:
scp server [ port-number ] [ vpn-instance
vpn-instance-name ] { put | get } source-file-name
[ destination-file-name ] [ identity-key { dsa |
ecdsa | rsa | { x509v3-ecdsa-sha2-nistp384 |
x509v3-ecdsa-sha2-nistp256 } pki-domain
domain-name } | prefer-compress zlib |
prefer-ctos-cipher { 3des-cbc | aes128-cbc |
aes256-cbc | des-cbc | aes128-ctr | aes192-ctr |
aes256-ctr | aes128-gcm | aes256-gcm
} |
prefer-ctos-hmac { md5 | md5-96 | sha1 |
sha1-96 | sha2-256 | sha2-512 } | prefer-kex
{ dh-group-exchange-sha1 | dh-group1-sha1 |
dh-group14-sha1 | ecdh-sha2-nistp256 |
ecdh-sha2-nistp384 } | prefer-stoc-cipher
{ 3des-cbc | aes128-cbc | aes256-cbc | des-cbc
| aes128-ctr | aes192-ctr | aes256-ctr |
aes128-gcm | aes256-gcm } | prefer-stoc-hmac
{ md5 | md5-96 | sha1 | sha1-96 | sha2-256 |
sha2-512 }] * [ { public-key keyname |
server-pki-domain domain-name } | source
{ interface interface-type interface-number | ip
ip-address } ] *
• In FIPS mode, connect to the IPv4
SCP server,
and transfer files with this server:
scp server [ port-number ] [ vpn-instance
Available in user view.