EasyManuals Logo

HPE FlexNetwork 5510 HI Series Security Configuration Guide

HPE FlexNetwork 5510 HI Series
551 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
41
Setting the LDAP server timeout period
If the device sends a bind or search request to an LDAP server without receiving the server's
response within the server timeout period, the authentication or authorization request times out.
Then, the device tries the backup authentication or authorization method. If no backup method is
configured in the ISP domain, the device considers the authentication or authorization attempt a
failure.
To set the LDAP server timeout period:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter LDAP server view.
ldap server
server-name N/A
3.
Set the LDAP server
timeout period.
server-timeout
time-interval
By default, the LDAP server timeout
period is 10 seconds.
Configuring administrator attributes
To configure the administrator DN and password for binding with the LDAP server during LDAP
authentication:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter LDAP server view.
ldap server
server-name N/A
3.
Specify the administrator
DN.
login-dn
dn-string
By default, no administrator DN is
specified.
The administrator DN specified on
the device must be the same as
configured on the LDAP server.
4. Configure the
administrator password.
login-password
{
cipher
|
simple
} password
By default, no administrator
password is specified.
Configuring LDAP user attributes
To authenticate a user, an LDAP client must complete the following operations:
1. Establish a connection to the LDAP server.
2. Obtain the user DN from the LDAP server.
3. Use the user DN and the user password to bind with the LDAP server.
LDAP provides a DN search mechanism for obtaining the user DN. According to the mechanism, an
LDAP client sends search requests to the server based on the search policy determined by the LDAP
user attributes of the LDAP client.
The LDAP user attributes include:
• Search base DN.
• Search scope.
• Username attribute.
• Username format.
• User object class.
If the LDAP server contains many directory levels, a user DN search starting from the root directory
can take a long time. To improve efficiency, you can change the start point by specifying the search
base DN.

Table of Contents

Other manuals for HPE FlexNetwork 5510 HI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork 5510 HI Series and is the answer not in the manual?

HPE FlexNetwork 5510 HI Series Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork 5510 HI Series
CategorySwitch
LanguageEnglish

Related product manuals