Tab Parameter Description
Cold aisle
temperature and
humidity sharing
This function can be enabled only
when at least one smart cooling
product in the teamwork group is
equipped with cold aisle T/H sensors. If
this function is enabled, the master
unit in the teamwork group collects
the cold aisle temperature and
humidity values from all units
equipped with cold aisle sensors, and
synchronizes the temperature and
humidity control type and setpoints to
all slave units.
Hot aisle temperature
and humidity sharing
This function can be enabled only
when at least one smart cooling
product in the group is equipped with
hot aisle T/H sensors. If this function is
enabled, the master unit in the
teamwork group collects the hot aisle
temperature and humidity values from
all units equipped with hot aisle
sensors, and synchronizes the
temperature and humidity control type
and setpoints to all slave units.
Low temperature
component
Species whether a low temperature
component is used.
System
Settings
Outdoor unit
condensate mode
● Air-cooled: The outdoor unit is an
air-cooled outdoor unit.
● Water-cooled: The outdoor unit is a
water-cooled module.
Temp control
intelligent monitoring
board
A temperature control intelligent
monitoring board is used to monitor
the outdoor environment.
Check the interior of the electric
control box of the outdoor unit:
● If there is an intelligent
temperature control monitoring
board, set this parameter to Yes.
● If there is no intelligent
temperature control monitoring
board, set this parameter to No.
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 157
To Next Page
Loading...
Need help?
General