Function Path Operation
Remotely
open a
cabinet
electroni
c clasp
lock
Choose
Monitoring >
Cabinet > IT
Cabinet101a.
Click the
Controls tab.
Select Open front door or Open
back door from the Cabinet
door control drop-down list box,
and click Submit to remotely
open the door.
Open
cabinet
electroni
c clasp
locks in
batches
Choose Monitoring > Cabinet,
and click the Controls tab.
Select Open front door, Open
back door, or Open all doors
from the Open the door drop-
down list box, select the setting,
and click Submit. The cabinet
electronic clasp locks unlock the
doors in batches based on the
signal value.
a: Cabinet electronic clasp lock 1 of IT cabinet 101 is used as an example.
Only IT cabinets support remote door opening and closing.
Step 6 When closing the door, rotate the lock handle vertically downwards. If the door
cannot be opened or closed properly, locate the fault.
1. Check whether there is friction between the lock tongue and the electronic
clasp lock. If there is friction, adjust the installation position of the electronic
clasp lock.
Figure 5-46 Adjusting the installation position
2. Check whether there is interference between the lock tongue and the cabinet
post. If they interfere with each other, adjust the installation position of the
lock tongue.
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 206
To Next Page
Loading...
Need help?
General