– To prevent security risks, the system prompts you to set the password of the admin
user when you log in to the system for the rst time.
– If you enter incorrect passwords for ve consecutive times, the account will be
locked for 5 minutes by default.
– To prevent security risks, periodically log in to the system as the admin user, click
the drop-down list in the upper right corner, and click Change Password to change
the administrator password.
– You need to set Internet Explorer before accessing the camera WebUI for the
rst
time.
Table 5-31 Internet Explorer settings
Settings Procedure
Disable the proxy server. 1. Choose Tools > Internet
Options.
The Internet Options dialog box
is displayed.
2. Click the Connections tab.
3. Click LAN Settings.
4. Deselect Use a proxy for your
LAN.
5. Click OK.
Enable the ActiveX controls and
plug-ins or set them to the prompt
mode.
1. Choose Tools > Internet
Options.
The Internet Options dialog box
is displayed.
2. Click the Security tab.
3. Select Internet.
4. Click Custom level.
The Security Settings-Internet
Zone dialog box is displayed.
5. Set Automatic prompting for
ActiveX controls to Enable, and
set Download unsigned ActiveX
controls and Initialize and script
ActiveX controls not marked as
safe for scripting to Prompt.
6. Click OK.
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 210
To Next Page
Loading...
Need help?
General