EasyManuals Logo

Huawei FusionModule2000-S User Manual

Huawei FusionModule2000-S
346 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #223 background imageLoading...
Page #223 background image
Figure 5-51 Setting the IP address
Table 5-32 IP address parameters
Parameter Description
IPv4 address
assignment
Method for obtaining the IP address. The options are
Obtain IP address automatically and Use the
following IP address. The default value is Obtain IP
address automatically.
IPv4 address Camera IP address. This parameter is available only
when IPv4 address assignment is set to Use the
following IP address.
Enter the planned IP address, for example,
192.168.1.161. IP addresses starting with 127 are
invalid. You must enter an IP address starting with a
value that ranges from 1 to 223.
IPv4 gateway Gateway IP address of the network where the camera is
located. The default value is 192.168.0.1.
IPv4 subnet
mask
Subnet mask of the network where the camera is
located. The default value is 255.255.255.0.
Primary DNS Primary DNS IP address. The default value is 0.0.0.0.
Secondary DNS Secondary DNS IP address. The default value is 0.0.0.0.
3. On the View tab page, click the General tab to access the General tab page.
Select Video and set the parameters, as shown in the following
gures.
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 212

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei FusionModule2000-S and is the answer not in the manual?

Huawei FusionModule2000-S Specifications

General IconGeneral
BrandHuawei
ModelFusionModule2000-S
CategoryStorage
LanguageEnglish

Related product manuals