Huawei FusionModule2000-S User Manual

Table 5-40 Parameter description
Parameter Setting
The NTP clock source server Indicates whether the NTP clock
source server is specied for time
synchronization.
● Select Yes if an NTP server is
congured onsite.
● Select No If no NTP server is
congured onsite.
NTP server IP Indicates the IP address of the NTP
clock source server. After this
parameter is specied, the server
synchronizes the time to this clock
source.
● If an NTP server is congured onsite, synchronize the time with the NTP
server.
● If no NTP server is congured onsite, manually congure the server time:
Change Timezone
cong and Time cong based on the time of the source
server to be synchronized.
Step 8
Congure cameras to synchronize time with the IVS1800.
The camera NTP synchronization function for the server is disabled by default. The
camera NTP synchronization function needs to be enabled for the server that
connects to the camera. After the camera NTP synchronization function is enabled
on the server, cameras will automatically synchronize time with the server.
1. Log in to the OMU portal as user admin.
2. Choose Maintenance >
Unied Conguration.
3. Set Module Name to SCU and click Search.
4. In the search results, click Edit in the row where Parameter Name is NTPIPC
and set Value to 1.
5. Click Save. After the camera NTP synchronization function is enabled, the
camera, after being connected to the server, will automatically time-
synchronize with the server.
Figure 5-74
Conguring camera NTP synchronization
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 239

Huawei FusionModule2000-S Specifications

General

Brand	Huawei
Model	FusionModule2000-S
Category	Storage
Language	English