Huawei FusionModule2000-S User Manual

Procedure
Step 1 Apply for a xed IP address to the equipment room network administrator.
Step 2 Set ECC800-Pro communications parameters.
● (WAN port networking) On the ECC800-Pro WebUI, set the IP address, subnet
mask, and default gateway, and click Submit.
Table 5-46 IP parameters
Path Parameter Default Value Setting
System
Settings >
System
Parameters >
Monitor IP >
WAN_n
IP address – WAN_1:
192.168.8.10
– WAN_2:
192.168.0.10
Set this parameter
based on the IP
address assigned by
the network
administrator.
Subnet
mask
255.255.255.0 Set this parameter
based on the subnet
mask assigned by the
network
administrator.
Default
gateway
– WAN_1:
192.168.8.1
– WAN_2:
192.168.0.1
Set this parameter
based on the default
gateway address
assigned by the
network
administrator.
● (4G networking) Set mobile data parameters on the ECC800-Pro WebUI.
Table 5-47 Mobile data
Path
Parameter Default Value Setting
Choose
System
Settings >
System
Parameters >
Mobile Data.
Mobile data
control
Disable Set this parameter to
Enable and click
Submit.
Step 3 Set management system communications parameters and authentication
password on the ECC800-Pro WebUI.
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 249

Huawei FusionModule2000-S Specifications

General

Brand	Huawei
Model	FusionModule2000-S
Category	Storage
Language	English