Huawei FusionModule500 User Manual

Step 3 Congure disk initialization.
NO TE
Recording data can be stored only after you install and initialize the disks.
1. Choose Local Conguration > Local Disk.
2. In the upper right corner of the RAID Groups area, click Initial Disk
3. Congure disk initialization.
Figure 5-40 Disk initialization (RAID 5 economical conguration by default)
Step 4 Modify the IP address for the IVS1800.
1. Choose Local Conguration > Server conguration. Set the service IP
address (internal IP address of the IVS1800), time zone, and time according to
the site requirements.
Figure 5-41
Conguring the server (Single Mode by default)
NO TE
Set Business IP to XXX.XXX.XXX.XXX, Subnet mask to 255.255.255.0, and Gateway IP
to XXX.XXX.XXX.XXX. The values here are examples. The actual value prevails.
2. Change the PC IP address to an address in the network segment of the new
IVS1800 IP address, enter the IVS1800 IP address in the address box of the
Internet browser, and log in to the OMU portal system.
FusionModule500 Smart Mini Data Center
User Manual 5 Power-On Commissioning
Issue 02 (2020-12-25) Copyright © Huawei Technologies Co., Ltd. 206

Huawei FusionModule500 Specifications

General

Brand	Huawei
Model	FusionModule500
Category	Storage
Language	English