No. Component Onsite Installation Onsite Cable
Connection
(8) Smoke detector Not required Not required
(9) 3.5 kW split-type
air conditioner
Required Required
If the VCN or IVS1800, server, and LAN switch are congured, determine their installation
positions based on the site requirements.
4.1.5 Personnel Requirements
Only trained and qualied personnel who fully understand basic safety
precautions are allowed to install and operate a modular data center.
Huawei will not be liable for any consequence caused by the violation of this
document.
The requirements are as follows:
● Customers' installation personnel must be trained by Huawei and understand
how to install and operate a modular data center.
● The number of installation personnel varies based on the project progress and
installation environment. Typically, two to three persons are required.
4.2 Hardware Installation
The angle of door opening by the gas spring is 110°. Ensure that the door opening
angle is less than 110°.
4.2.1 Cabinet Transportation and Unpacking
Context
● Only trained personnel are allowed to move the cabinet. Remove the packed
cabinet from the pallet using a pallet truck and move the cabinet to the
installation position.
● To prevent the cabinet from falling over, secure it to the pallet truck using
ropes before moving it.
● To prevent shocks or falls, move the cabinet gently. After placing the cabinet
in the installation position, unpack it and take care to prevent scratches. Keep
the cabinet steady during unpacking.
FusionModule500 Smart Mini Data Center
User Manual 4 Installation Guide
Issue 02 (2020-12-25) Copyright © Huawei Technologies Co., Ltd. 63
To Next Page
Loading...
Need help?
General