Figure 4-7 Removing an aisle containment
Step 8 Move the removed glass doors, gas springs, top plate, aisle containment, and
cabinet to the specied installation position using an elevator.
Step 9 Assemble the removed components with the cabinets by referring to Step 7 to
Step 2.
----End
4.2.3 Installing a Cabinet
Prerequisites
The
oor levelness meets engineering requirements.
Context
To position a cabinet, perform the following steps:
1. Determine the position of the cabinet based on the engineering layout
diagram.
2. Place the cabinet at the correct installation position.
FusionModule500 Smart Mini Data Center
User Manual 4 Installation Guide
Issue 02 (2020-12-25) Copyright © Huawei Technologies Co., Ltd. 69
To Next Page
Loading...
Need help?
General