Step 5 Select the Modular to be added and drag the module icon to the Room area.
Figure 5-53 Adding a smart module in the room area
Step 6 Modify Management Info of the smart module or retain the default values, and
then click .
The parameters with * are mandatory.
----End
Follow-up Procedure
Perform the following operations in the Data Center Planning page as required.
FusionModule500 Smart Mini Data Center
User Manual 5 Power-On Commissioning
Issue 02 (2020-12-25) Copyright © Huawei Technologies Co., Ltd. 223
To Next Page
Loading...
