Procedure
Step 1 On the CloudOpera NetEco app, tap in the upper right corner.
Step 2 On the Create network screen, enter network information as prompted and tap
Conrm.
Figure 5-58 Creating a network
Table 5-27 Parameter description
Parameter
Description
Network Name Name of the network.
ESN ESN of the ECC controller.
NOTE
Tap to scan the QR code on the ECC controller to
obtain the ESN.
Longitude Longitude of the network. You can manually enter the
value or use GPS to locate.
Latitude Latitude of the network. You can manually enter the
value or use GPS to locate.
Customer Information Customer information.
FusionModule500 Smart Mini Data Center
User Manual 5 Power-On Commissioning
Issue 02 (2020-12-25) Copyright © Huawei Technologies Co., Ltd. 232
To Next Page
Loading...
