EasyManuals Logo

Huawei Quidway NetEngine 20 series User Manual

Huawei Quidway NetEngine 20 series
237 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #194 background imageLoading...
Page #194 background image
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations 9 Telnet and SSH
Issue 05 (2010-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-45
<Quidway> system-view
[Quidway] stelnet server enable
[Quidway] sftp server enable
# When you log in for the first time, enable the first-time authentication for the SSH client.
[client] ssh client first-time enable
[client] quit
# Connect the STelnet client to the SSH server through RADIUS authentication mode.
<client> system-view
[client] stelnet 10.164.39.222
Please input the username: ssh1@ssh.com
Trying 10.164.39.222 ...
Press CTRL+K to abort
Connected to 10.164.39.222 ...
Step 6 Verify the configuration.
After the configuration, run the display radius-server configuration command and the
display ssh server session command on the SSH server. You can view the configuration of
the RADIUS server on the SSH server. You can also view that the STelnet or SFTP client is
connected to the SSH server successfully in the RADIUS authentication.
# Display the configuration of the RADIUS server.
[Quidway -aaa] display radius-server configuration
-------------------------------------------------------------------
Server-template-name : ssh
Protocol-version : standard
Traffic-unit : B
Shared-secret-key : huawei
Timeout-interval(in second) : 5
Primary-authentication-server : 10.164.16.49:1812:LoopBack-1
Primary-accounting-server : 0.0.0.0:0:LoopBack0
Secondary-authentication-server : 0.0.0.0:0:LoopBack0
Secondary-accounting-server : 0.0.0.0:0:LoopBack0
Retransmission : 3
Domain-included : YES
-------------------------------------------------------------------
# Display the connection of the SSH server.
[Quidway] display ssh server session
Conn Ver Encry State retry Username
VTY 0 2.0 AES started 0 client001
----End
Configuration Files
#
sysname Quidway
#
radius-server template ssh
radius-server authentication 10.164.16.49 1812
#
aaa

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway NetEngine 20 series and is the answer not in the manual?

Huawei Quidway NetEngine 20 series Specifications

General IconGeneral
BrandHuawei
ModelQuidway NetEngine 20 series
CategoryNetwork Router
LanguageEnglish

Related product manuals