Huawei UPS5000-E-30 kVA - Page 105

Item Description Default
Value
Value Range
SNMP Refers to the Simple Network
Management Protocol used to
connect to the NetEco.
Disable: The SNMP services
are unavailable.
Read-only: Only the read
permission is enabled. Settings
are not allowed.
NetEco: The read permission
and the write permission on
related parameters supported
by the NetEco are enabled.
Enable: All functions are
available.
Enable Disable,
Enable, Read-
only, NetEco
ModbusRTU Refers to a Modbus protocol
based on the RS485 bus,
which is used to connect to
the NetEco.
Disable: The Modbus RTU
services are unavailable.
Read-only: Only the read
permission is enabled. Settings
are not allowed.
NetEco: The read permission
and the write permission on
related parameters supported
by the NetEco are enabled.
Enable: All functions are
available.
Enable Disable,
Enable, Read-
only, NetEco
Delete IP
whitelist
Delete the IP address whitelist
of the WEB, SNMP, and
ModbusTCP.
WEB WEB. SNMP,
ModbusTCP
UPS5000-E-(30 kVA–180 kVA)
User Manual (Integrated UPS) 4 LCD Interface
Issue 02 (2022-12-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 97