Item Description
Power factor Proportion of the bypass input active power to the
bypass input apparent power
Table 4-7 Battery Status
Item Description
Battery Status Lead-acid battery: The value can be Not
connected, Equalized charging, Float charging,
Hibernating, Discharging, or Not chg. or dis.
Lithium battery: The value can be Not connected,
Float charging, Discharging, or Not chg. or dis.
Voltage (V) Voltage of the battery string
Current (A) Current of the battery string (the current is +
when batteries are being charged and – when
discharged)
Temperature (°C) (only for
lead-acid batteries)
Current operating temperature of the battery (A
battery sensor is required. If no sensor is
connected, N/A is displayed.)
Backup time (min) Estimated battery backup time at the current load
Remaining cap. (%) Remaining battery capacity
SOH Battery state of health
Maximum cell temperature
(°C) (only for lithium
batteries)
-
Min cell temperature (°C)
(only for lithium batteries)
-
Table 4-8 Total Runtime
Item
Description
Bypass runtime (h) Total time during which the UPS runs in bypass
mode
Inv. runtime (h) Total time during which the UPS runs in inverter
mode
UPS5000-E-(30 kVA–180 kVA)
User Manual (Integrated UPS) 4 LCD Interface
Issue 02 (2022-12-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 85
To Next Page
Loading...
