Huawei UPS5000-E Series User Manual

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
4 User Interface
Issue 11 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
187
Item
Description
Select the network security
certificate key to be uploaded
Upload the key of the network security certificate.
Export certificate file: Export the root certificate.
Time
Set the time zone and time for the site.
Comm. Settings
Set IP Settings, RS485 Settings, ModbusTCP Settings, Amb. T/H Sensor, Batt. Temp.
Sensor, BMU, and WIFI Settings.
ModbusTCP
Table 4-20 Access ModbusTCP security certificate
Item
Description
Upload CA certificate file
Import a CA certificate for the UPS to verify the
certificate of the Modbus-TCP communication access
party.
Upload local certificate file
Users can replace the UPS certificate with a trusted
certificate.
Upload key file
Key file of the certificate.
Key password
Decryption password of the key.
Confirm key password
Confirm the decryption password of the key.
Set twice challenge prelim share code: Set the user authentication password between the
NetEco and the UPS.
Alarm Parameters
Enable or disable alarm information for components in the system.
iBOX Settings
Set iBOX parameters.
SNMP

The default SNMP version is SNMPv3, and the preset MD5/SHA password is
Changeme1, and the preset DES/AES password is Changeme2. Change the password
after your first login, preventing unauthorized access.

Huawei UPS5000-E Series Specifications

General

Brand	Huawei
Model	UPS5000-E Series
Category	UPS
Language	English