UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Copyright © Huawei Technologies Co., Ltd.
The standard protocols SNMP V1 and SNMP V2 have security risks. You are advised to use the
secure protocol SNMP V3.
The standard encryption algorithms MD5 and DES have security risks. You are advised to use the
secure encryption algorithms SHA and AES.
To obtain the Mib file, choose System Settings > SNMP > Mib File > Export.
The SNMP Trap is used to set the IP address of a server on which the NMS software is
installed. The trap port needs to be the same as that on the NMS. If SNMP Trap is
incorrectly set or not set, system information will be lost or not reported in time.
Event Notice
Mailbox Settings: Set the email address of the recipient in Mailbox Settings.
Alarm Notification, set Alarm notification delay in Alarm Notification Parameter
Settings, set Time of the first reminder and Interval in Alarm Reminder
Configuration, and perform the Add, Modify, or Delete operation on alarm
notifications in Alarm Notification User Settings.
After the Event Notice information is configured, alarms will be sent to the configured
mailbox.
Outbox configuration
Table 4-21 Outbox settings
Mailbox server IP address
After the IP address of the outbox server is configured,
alarm notification emails will be sent to the configured
server.
TLS, SSL, and No encryption are supported.
The default value is 587.
User authentication for
mailbox server login
After Enable is selected, user authentication is required
for server login.
User name for authentication.
Password for authentication.
Mailbox Certificate: Upload the CA certificate file.
4.2.6 Maintenance
On the Maintenance page, you can perform Soft Upgrade and User Management, query
Version Information, query and export E-label, export Fault Information, and import and
back up Configuration File.
To Next Page
Loading...
