HUSABERG FE 570 EU - Removing the Oil Pumps; Removing the Shift Shaft; Removing the Shift Drum Locating Unit; Removing the Locking Lever

30/ENGINE DISASSEMBLY 108
18.33Removing the oil pumps
300334-10
– Remove screws .
– Take off oil pump cover .
300335-10
– Take out both oil pump shafts  together with pin, internal rotor  and external
rotor .
18.34Removing the shift shaft
300516-10
– Push sliding plate  away from the shift drum locating unit. Remove shift shaft 
with the washer.
18.35Removing the shift drum locating unit
300336-10
– Remove screw .
– Push away locking lever  from shift drum locating unit  and remove the shift
drum locating unit.
– Relieve tension from the locking lever.
18.36Removing the locking lever
300364-10
– Unscrew  and remove together with locking lever , washer, sleeve and spring.