HUSABERG FE 570 EU - Disassembling the Piston Rod

04/SHOCK ABSORBER, SWINGARM 37
200759-10
– Remove adjusting ring  with the intermediate washer.
200760-10
– Remove compression damping adjuster . Remove the spring and piston.
7.14Disassembling the piston rod
– Disassemble the shock absorber. ( p. 36)
200761-10
– Clamp the piston rod with the fork in a bench vise.
– Remove nut .
Info
If mount  is loosened, apply counteractive force.
– Remove rebound damping shim stack .
Info
Guide the rebound damping shim stack onto a screwdriver and put them
aside together.
200762-10
– Remove piston .
– Remove compression damping shim stack .
Info
Guide the compression damping shim stack onto a screwdriver and put
them aside together.
200763-10
– Unscrew and remove mount .
– Remove rebound damping shim stack .
Info
Guide the rebound damping shim stack onto a screwdriver and put them
aside together.