HUSABERG FE 570 EU - Disassembling the Shock Absorber

04/SHOCK ABSORBER, SWINGARM 36
7.13Disassembling the shock absorber
– Remove the spring. ( p. 35)
200753-10
– Take note of the present state of rebound damping  and compression damp-
ing .
– Completely open the adjustment elements of the rebound damping and compres-
sion damping.
– Remove rubber cap  of the reservoir.
200754-10
– Slowly unscrew screw .
The pressurized nitrogen is bled off.
200755-10
– Remove locking cap .
200756-10
– Press seal ring retainer  all the way in with the special tool.
Disassembly tool (T1216) ( p. 275)
– Remove lock ring .
Info
Do not scratch the inner surface.
– Take out the shock absorber.
200757-10
– Remove screw . Drain the oil.
200758-10
– Remove the piston rod. Drain the remaining oil.