11/WIRING HARNESS, BATTERY 74
100427-10
– Remove faulty main fuse .
Info
You can recognize a faulty fuse by the burned-out fuse wire .
A reserve fuse is located in the starter relay.
– Insert a new main fuse.
Fuse (58011109120)
– Plug in connector on the starter relay.
– Check the functioning of the electrical equipment.
Tip
Replace the spare fuse so that it is available if needed.
– Attach protection covers .
– Mount the seat. ( p. 59)
14.4Changing the fuses of individual power consumers
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
– Switch off all power consumers and switch off the engine.
– Remove the seat. ( p. 59)
100428-10
– Open fuse box cover .
100429-10
– Remove the faulty fuse.
Guideline
Fuse 1 - 10A - EFI control unit
Fuse 2 - 10A - fuel pump
Fuse 3 - 10A - high beam, low beam, parking light, tail light, license plate lamp
Fuse 4 - 10A - speedometer, horn, brake light, flasher light, radiator fan
(optional)
Fuse 5 - not used
Fuse res - 10A - spare fuses
Info
You can recognize a faulty fuse by the burned-out fuse wire .
Warning
Fire hazard The electrical system can be overloaded by the use of incorrect
fuses.
– Use only fuses with the prescribed amperage. Never by-pass or repair
fuses.
– Use spare fuses with the correct rating only.
Fuse (58011109110)
Tip
Replace the spare fuse in the fuse box so that it is available if needed.
To Next Page
Loading...
