HUSABERG FE 570 EU - Removing the Diaphragm; Removing the Transmission Shafts; Removing the Crankshaft

30/ENGINE DISASSEMBLY 110
18.41Removing the diaphragm
300375-10
– Remove diaphragm .
18.42Removing the transmission shafts
300342-10
– Secure the engine in an upright position.
– Remove lock ring .
300343-10
– Pull out both transmission shafts together from the bearing seats.
Info
Do not lose the washers.
18.43Removing the crankshaft
300344-10
– Take out crankshaft .
– Take off the right section of the engine case.