HUSABERG FE 570 EU - Page 58

05/EXHAUST 56
300677-11
– Mount and tighten screw .
Guideline
Remaining screws, chassis M8 25 Nm
(18.4 lbf ft)
– Tighten screw .
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
– Position the exhaust clamp.
– Tighten screw .
Guideline
Screw, exhaust clamp on manifold M8 8 Nm (5.9 lbf ft)
300676-11
– Plug in connector  of the lambda sensor.
– Route the cable so it is tension-free and secure it with cable binders.
– Install the throttle valve body. ( p. 162)
– Install the shock absorber. ( p. 34)
– Install the main silencer. ( p. 54)