programmed and configured.
It allows you to switch the registration strategies over PMR network and RoIP
network.
It allows you to enable or disable the Video Call feature.
With the Video Call feature enabled, if the voice registration is set to
narrowband voice only, you can still make a video call.
With the Video Call feature disabled, if the voice registration is set to
narrowband voice only, you cannot make a video call.
It allows you to enable or disable the scan feature.
It allows you to temporarily remove the channel from the scan list.
The signal strength received from a BS may fluctuate due to position change,
affecting the communication quality of the radio. On such occasions, this
feature allows the radio to automatically register with the BS with stronger
signal.
This feature allows an idle radio to keep detecting the signal strength of the BS
with which it registers. If the signal strength goes below the threshold level
preset by the dealer, the radio will automatically hunt for an adjacent BS with
stronger signal strength and register with it.
In a BS overlapping area, this feature allows the radio to switch back to the
home station channel when its signal strength reaches the preset threshold. It is
recommended that you set your frequently used channel as the home station
channel.
It allows you to enable or disable the roaming feature.
To Next Page
Loading...
Need help?
General
