164 RackSwitch G8000: Application Guide
ISCLI Stacking Commands
Stacking-related ISCLI commands are listed here. For details on specific
commands, see the RackSwitch G8000 ISCLI Reference.
• [no] boot stack enable
• boot stack higig-trunk <port list>
• boot stack mode master|member
• boot stack push-image boot-image|image1|image2 <asnum>
• boot stack vlan <VLAN> <asnum>|master|backup|all
• default boot stack <asnum>|master|backup|all
•[no] logging log stacking
• no stack backup
• no stack name
• no stack switch-number <csnum>
• show boot stack <asnum>|master|backup|all
• show stack attached-switches
• show stack backup
• show stack dynamic
• show stack link
• show stack name
• show stack path-map [<csnum>]
• show stack push-status
• show stack switch
• show stack switch-number [<csnum>]
• show stack version
• stack backup <csnum>
• stack name <word>
• stack switch-number <csnum> bind <asnum>
• stack switch-number <csnum> mac <MAC address>
To Next Page
