IBM RackSwitch G8000

© Copyright IBM Corp. 2011 Chapter 14. VMready 179
5. Define the VM group.
When VMs are added, the server ports on which they appear are automatically
added to the VM group. In this example, there is no need to manually add ports
1 and 2.
6. If necessary, enable VLAN tagging for the VM group:
Note: If the VM group contains ports that also exist in other VM groups, make sure
tagging is enabled in both VM groups. In this example configuration, no ports
exist in more than one VM group.
7. Save the configuration.
RS G8000(config)# virt vmgroup 1 profile Finance
RS G8000(config)# virt vmgroup 1 vm arctic
RS G8000(config)# virt vmgroup 1 vm monster
RS G8000(config)# virt vmgroup 1 vm sierra
RS G8000(config)# virt vmgroup 1 vm 00:50:56:4f:f2:00
RS G8000(config)# virt vmgroup 1 portchannel 1
RS G8000(config)# virt vmgroup 1 tag