IBM RackSwitch G8000 User Manual

© Copyright IBM Corp. 2011 Chapter 27. Simple Network Management Protocol 323
SNMPv2 Trap Host Configuration
The SNMPv2 trap host configuration is similar to the SNMPv1 trap host
configuration. Wherever you specify the model, use
snmpv2 instead of snmpv1 .
Note: N/OS 6.8 supports only IPv4 addresses for SNMP trap hosts.
RS G8000(config)# snmp-server user 10 name v2trap
RS G8000(config)# snmp-server group 10 security snmpv2
RS G8000(config)# snmp-server group 10 user-name v2trap
RS G8000(config)# snmp-server group 10 group-name v2trap
RS G8000(config)# snmp-server access 10 name v2trap
RS G8000(config)# snmp-server access 10 security snmpv2
RS G8000(config)# snmp-server access 10 notify-view iso
RS G8000(config)# snmp-server notify 10 name v2trap
RS G8000(config)# snmp-server notify 10 tag v2trap
RS G8000(config)# snmp-server target-address 10 name v2trap
address 100.10.2.1
RS G8000(config)# snmp-server target-address 10 taglist v2trap
RS G8000(config)# snmp-server target-address 10 parameters-name
v2param
RS G8000(config)# snmp-server target-parameters 10 name v2param
RS G8000(config)# snmp-server target-parameters 10 message snmpv2c
RS G8000(config)# snmp-server target-parameters 10 user-name v2trap
RS G8000(config)# snmp-server target-parameters 10 security snmpv2
RS G8000(config)# snmp-server community 10 index v2trap
RS G8000(config)# snmp-server community 10 user-name v2trap

IBM RackSwitch G8000 Specifications

General

Brand	IBM
Model	RackSwitch G8000
Category	Network Router
Language	English