Table 3-1 (Page 11 of 24). Firmware Error Codes.
Error Code Description Action / Possible Failing FRU
29A00003 Keyboard not present/detected. 1. Keyboard
2. Replace the I/O board. (See notes
on 3-1.)
29A00004 Keyboard stuck key test failed. 1. Keyboard
2. Replace the I/O board. (See notes
on 3-1.)
29B00004 Mouse not present/detected. 1. Mouse
2. Replace the I/O board. (See notes
on 3-1.)
2B200402 Unsupported Processor. CPU Card.
2B2xxx22 Processor disabled. CPU Card.
Where xxx indicates the processor type
as follows:
000 166 Mhz 1 or 2 way
Processor card
200 166 Mhz 1 or 2 way
Processor card
211 Down level VPD. Contact
service person.
251 166 Mhz 1 way Processor
card
261 166 Mhz 2 way Processor
card
451 332 Mhz 1 way Processor
card
461 332 Mhz 2 way Processor
card
2B2xxx31 Processor failed. CPU Card.
See error code 2B2xxx22 for xxx
definitions.
2B2xxx42 Unsupported processor type. CPU Card.
See error code 2B2xxx22 for xxx
definitions.
2BA00xxx Service Processor
2BA00000 Service processor POST failure. 1. Unplug the system power cable
and wait until the system power
indicator remains off and the
operator panel is blank.
2. Plug the system power cable back
in and retry the operation.
3. Replace the service processor
card.
4. Replace the I/O board. (See notes
on 3-1.)
3-12 Service Guide
To Next Page
Loading...
Need help?
General