Chapter 6. Installing the Library 6-7
Figure 6-6. I/O Station enabled
a. On the front panel, locate the access hole for the I/O Station locking
mechanism below the I/O Station ( in Figure 6-7).
Figure 6-7. I/O Station lock release access hole
b. Insert the 2 mm hexagonal wrench, or a similar tool, into the lock release
access hole and gently push to release the locking mechanism.
4. Remove the cartridge magazines from the front of the library.
a34z0110
1
a34z0024
1
To Next Page
Loading...
