EasyManua.ls Logo

IBM System Storage TS3400 Tape Library - Page 27

IBM System Storage TS3400 Tape Library
295 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1. Start Service 1-11
009F
During Y operation, a
cartridge magazine was
removed.
CHK 009F
1. Confirm the magazine is closed.
2. Cycle the power and try again.
3. Replace the Library Control Blade (page 9-8).
4. Replace the Accessor assembly (page 9-23).
5. Replace the Accessor Flat Cable Plate assembly (page 9-28).
6. Replace the Back Board assembly (page 9-37).
7. Replace the TS3400 Tape Library chassis (page 9-44).
00A0
Swivel operation error #1.
During swivel movement,
the specified number of
edges could not be
detected.
CHK 00A0
1. Cycle the power and try again.
2. Replace the Library Control Blade (page 9-8).
3. Replace the Accessor assembly (page 9-23).
4. Replace the Accessor Flat Cable Plate assembly (page 9-28).
5. Replace the Back Board assembly (page 9-37).
6. Replace the TS3400 Tape Library chassis (page 9-44).
00A1
Swivel operation error #2.
The swivel position sensor
was not detected after the
PUT position was moved.
CHK 00A1
00A2
Swivel operation error #3.
The swivel position sensor
was detected after the
GET position was moved.
CHK 00A2
00A4
During initialization, the
swivel origin could not be
detected.
CHK 00A4
00A8
Swivel calibration error
#1.
During swivel calibration,
CTRG. sensor OFF could
not be detected.
CHK 00A8
Cycle the power and try again.
00A9
Swivel calibration error
#2.
During swivel calibration,
CTRG. sensor ON could
not be detected.
CHK 00A9
00AA
Swivel calibration error
#3.
During offline swivel
calibration, the swivel
origin sensor OFF could
not be detected.
CHK 00AA
Cycle the power and try again.
00AF
During swivel operation,
a cartridge magazine was
removed.
CHK 00AF
1. Confirm the magazine is closed.
2. Cycle the power and try again.
3. Replace the Library Control Blade (page 9-8).
4. Replace the Accessor assembly (page 9-23).
5. Replace the Accessor Flat Cable Plate assembly (page 9-28).
6. Replace the Back Board assembly (page 9-37).
7. Replace the TS3400 Tape Library chassis (page 9-44).
Table 1-1. Library error codes (continued)
Code (H) Description
Panel
Indication
Action Required

Table of Contents

Related product manuals