Ice vulcan User Manual

Abbreviations and Acronyms 1-5
ICE Vulcan Service Manual
Chapters in the Manual
This manual is divided into thirteen chapters. An introduction to the topics that each chapter
covers is shown in Table 1-3.
Chapter
No.
Chapter Name
Description
1.
Introduction
Contains the information about this
manual, the related publications, and
writing styles used in this manual.
2.
Safety
Contains the safety and hazard information.
3.
Main Parts
Describes the main parts of the LPA.
4.
Installation
Contains the information about
installation of the main components of
LPA.
5.
CLARiTY Operating
System
Contains the information on CLARiTY configuration
manager.
6.
Maintenance and
Troubleshooting
Contains the information on replacement
instructions, service, maintenance, error
messages, its possible causes and the remedies.
7.
IPL
Contains the illustrated parts list of orderable parts.
8.
Master Slave Setup
Contains information about master/slave setup.
9.
Appendix A
Contains information about technical drawings,
technical and system specifications, and external
inputs and outputs.
10.
Appendix B
Contains the lists of all the configurable parameters
of LPA.
11.
Appendix C
Contains informations about Mains board test
points.
12.
Appendix D
Contains the theory of printing.
13.
Appendix E
Contains information about availability.
Table 1-3: List of Chapters

Ice vulcan Specifications

General

Brand	Ice
Model	vulcan
Category	Label Maker
Language	English