Equipment Safety Guidelines 2-4
ICE Vulcan Service Manual
Electrical Power
Warning
PERSONAL INJURY. Ensure that all external energy sources, mains
power leads are isolated
from equipment. This should be done
before attempting any maintenance or repair on any
part of the
product or before opening or removing any equipment covers.
Warning
PERSONAL INJURY. Ensure that any cables from the equipment
and compressed air hoses (if
applicable) are secured to avoid chance
of movement into walkways and becoming a trip
hazard. Route or
protect all cables to prevent damage.
Warning
PERSONAL INJURY. There will be sections of the printer control
board that will be permanently
powered via the on-board lithium
battery - therefore it is essential that the board should
never be
placed onto, nor stored in or on any conductive surface (including
conductive, plastic
bags etc.) as this would flatten the battery and/or
potentially result in battery overheating.
The battery is not to be
replaced by the operator.
Caution
EQUIPMENT DAMAGE. Do not unplug any connector on the
equipment when the mains
power is on (except USB and ethernet
cables).
Caution
EQUIPMENT DAMAGE. Operate the LPA within the voltage range
specified on the rating label
affixed to the unit. This information is
also repeated in Appendix A, “Specifications” of this
To Next Page
Loading...
Need help?
General