ICE Vulcan Service Manual
Introduction
The policy of ICE is to manufacture non-contact
coding systems that meet high standards of
performance and reliability.
Therefore, we employ strict quality control techniques to
eliminate the
potential for defects and hazards in our products.
The safety guidelines provided in this chapter are intended to educate the
operator on all
safety issues so that the operator can operate the
equipment safely.
Equipment Safety Guidelines
This section contains important safety guidelines pertaining to the
operation and handling
of the equipment.
Warning
PERSONAL INJURY. Only trained service or maintenance
personnel should perform the
installation or replacement
procedures. Qualified personnel are those who have successfully
completed the training courses, have sufficient experience with this
equipment, and are
aware of the potential hazards to which they
will be exposed.
Warning
PERSONAL INJURY. The LPA should be operated by an authorized
personnel who can use the
machine independently and without
causing damage to the equipment or a personal injury.
The
operating personnel should be trained and informed regularly about
safety and
environmental hazards.
Warning
PERSONAL INJURY. While performing maintenance or repair
work, disconnect the mains
supply unless it is absolutely necessary
to leave the supply on while carrying out adjustments.
The mains
plug is the mains disconnect and must be accessible at all times.
To Next Page
Loading...
Need help?
General