OTHER FUNCTIONS
Toggles between opening and closing the
accessed band’s squelch. (p. 20)
No secondary function.
After :
Transmit the appropriate
DTMF code or push [1] to
[8] to transmit the DTMF
memory contents when
the DTMF memory en-
coder is activated. (p. 51)
• Starts and stops scanning. (p. 42)
• Starts tone scan when an optional tone
squelch is in use. (p. 55)
No secondary function.
Starts and stops priority watch. (p. 48)
Turns the one-touch PTT function ON and
OFF. (p. 26)
Selects high output power. (p. 26) Turns the optional pager function ON.(p. 59)
Selects middle output power. (p. 26) Turns the optional code squelch function
ON. (p. 62)
Selects low output power. (p. 26)
Turns the DTMF memory encoder function
ON. (p. 50)
Selects –duplex. (p. 28)
Turns the subaudible tone encoder ON.
(p. 28)
Selects +duplex. (p. 28)
Turns the optional pocket beep function ON.
(p. 53)
Selects simplex (p. 28)
Turns the optional tone squelch function
ON. (p. 54)
Increases the audio output. (p. 20)
While being pushed, transmits a 1750 Hz
tone. (p. 28)
To Next Page
Loading...
