Icom IC-2710H

MODE ARRANGEMENT
21
81
MEMORY MODE (p. 32)
VFO MODE (p. 15)
CALL CHANNEL (p. 37)
SCRATCH PAD
MEMORY (p. 39)
See p. 49 for details.
DTMF MEMORY
CODE CHANNEL
Used for programming
the code channel for
pager and code squelch
(p. 57).
M/CALL
V/MHz
SCAN
V/MHz
SCAN
SET L
or no operation
for 30 sec.
SEL L
*
1
Only appears
*
2
Only appears
When the DTMF memory encoder is activated.
When the pager or code squelch is in use.
M/CALL
Although the following chart refers mainly to the VHF band, the transceiver has the same
mode arrangement in the UHF band.
IC-2710H.qxd 02.2.8 16:55 Page 81 (1,1)