2
INSTALLATION
10
■ Location
Select a location which can support the weight of the trans-
ceiver and does not interfere with driving in any way. We rec-
ommend the locations shown in the diagram below.
■ Single body installation
➀ Drill 4 holes where the mounting bracket is to be installed.
• Approx. 5.5–6 mm (
3
⁄16 in) when using nuts; approx. 2–3 mm (
1
⁄16
in) when using self-tapping screws.
➁ Insert the supplied screws, nuts and washers through the
mounting bracket and tighten.
➂ Adjust the angle for the clearest view of the function dis-
play.
NEVER place the transceiver or remote controller where
normal operation of the vehicle may be hindered or where
it could cause bodily injury.
NEVER place the transceiver or remote controller where
air bag deployment may be obstructed.
DO NOT place the transceiver or remote controller where
hot or cold air blows directly onto it.
AVOID placing the transceiver or remote controller in di-
rect sunlight.
• EXAMPLE INSTALLATION LOCATIONS
To Next Page
Loading...
