OTHER FUNCTIONS
• Clears a digit before entry. (p. 19)
• Cancels the scan, priority watch, pager,
code squelch or DTMF memory function.
(pgs. 42, 48, 51, 59, 62)
• Writes the VFO contents into the memory
channel or call channel. (pgs. 34, 38)
• Advances the memory channel number
when continuously pushed after program-
ming is completed. (p. 34)
After :
Transmit the appropriate
DTMF code. (p. 51)
Enters set mode and advances the set
mode selection order. (p. 82)
Turns the pager, code squelch, DTMF mem-
ory or DTMF remote function OFF.
(pgs. 59, 62, 63)
• Sets the keypad for numeral input.
(p. 19)
• Decreases the set mode selection order
after entering set mode. (p. 82)
Turns the subaudible tone encoder, pocket
beep or tone squelch OFF. (pgs. 28, 53, 54)
Increases the squelch level. (p. 20)
• The [SQL] control on the front panel has prior-
ity when rotated.
Mutes both band’s audio signals. (p. 21)
• Mute function is released when any operation is
performed.
Decreases the squelch level. (p. 20)
• The [SQL] control on the front panel has prior-
ity when rotated.
Locks the digit keys on the keypad (including
the A–D, # and
M
keys. (p. 16)
Decreases the audio output. (p. 20) Sends a 1750 Hz tone signal for 1 sec.
(p. 28)
To Next Page
Loading...
