Icom IC-2710H

16
WIRELESS OPERATION
68
■ HM-90 switches
➊ PTT SWITCH
➥ Push and hold to transmit; release to receive.
➥ Toggles between transmitting and receiving while the
one-touch PTT function is in use.
➋ BAND SWITCHES [BAND SELECT Y,Z]
➥ Select the desired band as the main band.
➥ Activate the para-watch function when pushed and held
when the main band is selected.
➥ Activate the sub band access function after pushing
[FUNC] on the rear panel.
➌ MONITOR SWITCH [MONI]
Toggles between opening and closing the accessed band’s
squelch.
BAND
SELECT
MONI
REMOTE CONTROL MICROPHONE
VOLSQL
LOCK
JAPAN
AFC AFC-OFF PTT-M MW
PGR
CALL
123 A
456 B
M
0# D
MR VFO CLR
C-SQL DTMF D-OFF
SCAN
MONI
FUNC
DTMF
KEY
DTMF
MEMO
MUTE SQL ENT
789 C
DUP– DUP
+
SIMP SPCH
PRIO REAR LOCK DEMO
TONE
HIGH MID LOW SET
T-SQLS T-SQL T-OFF
➓
➊
➋
➌
➍
➎
➏
➐
➑
➒
Front and side panels Rear panel
➍ SQUELCH LEVEL UP/DOWN SWITCHES
[YSQL], [ZSQL]
Vary the accessed band’s squelch threshold point for noise
mute.
➎ FREQUENCY UP/DOWN SWITCHES [UP], [DN]
➥ Push either switch to change the operating frequency,
memory channel, set mode contents, etc.
➥ Push and hold either switch to start scanning.
➏ ACTIVITY INDICATOR [UP], [DN]
Lights red while a key is pushed; lights green while the
one-touch PTT function is in use.
➐ AUDIO VOLUME UP/DOWN SWITCHES
[YVOL], [ZVOL]
Adjust the accessed band’s audio level.
➑ MODE INDICATOR
Indicates the microphone condition.
• Lights red when [FUNC] is pushed.
• Lights green when [DTMF KEY] is pushed.
• Lights orange when [DTMF MEMO] is pushed.
➒ LOCK SWITCH [LOCK]
Locks all switches and keys on the microphone except for
the PTT switch.
➓ KEYPAD
Used for controlling the transceiver, transmitting a DTMF
memory channel, etc.
IC-2710H.qxd 02.2.8 16:55 Page 68 (1,1)