OTHER FUNCTIONS
Calls up a call channel. No secondary function.
• After :
Input the appropriate digit
for frequency or memory
channel selection.
• After :
Transmit the appropriate
DTMF code.
• After :
Transmit the appropriate
DTMF memory contents.
[1] to [8] can be used for
DTMF memory.
Selects memory mode. No secondary function.
Selects VFO mode. Turns the one-touch PTT function ON
and OFF.
Selects high output power. Turns the optional pager function ON.
Selects mid output power. Turns the optional code squelch function
ON.
Selects low output power. Turns the DTMF memory function ON.
Selects – duplex. Turns the subaudible tone encoder ON.
Selects + duplex. Turns the optional pocket beep function
ON.
Selects simplex. Turns the optional tone squelch function
ON.
Mutes both bands’ audio signals. Starts and stops a priority watch.
To Next Page
Loading...
