Icom IC-2710H

16
WIRELESS OPERATION
70
KEY FUNCTION
SECONDARY FUNCTION (After )
FUNC
OTHER FUNCTIONS
Clears a digit before entry.
Cancels the scan, priority watch, pager,
code squelch or DTMF memory function.
Writes the VFO contents into the memory
channel or call channel.
Advances the memory channel number
when continuously pushed after program-
ming is completed.
• After :
Transmit the appropriate
DTMF code.
[
B
MONI]
Transmits a 1750 Hz tone
call signal for 1 sec.
[
A
SQL]
Transmits a 1750 Hz tone
call signal while pushing.
DTMF
KEY
Enters set mode and advances the set
mode selection order.
Turns the pager, code squelch, DTMF
memory or DTMF remote function OFF.
Decreases the set mode selection order
after entering set mode.
NOTE:
The IC-2710H has no voice synthesizer
function.
Turns the subaudible tone encoder, or op-
tional pocket beep/tone squelch OFF.
Sets the keypad for numeral input. Enters and exits demonstration mode.
Opens and closes the accessed band’s
squelch.
Starts and stops scanning.
Starts tone scan while an optional tone
squelch is in use.
Selects 1 of the 4 preset squelch levels. Locks all the keys on the microphone key-
pad.
MW
A
CLR
B
D-OFF
SET
C
SPCH
T-OFF
D
ENT
DEMO
M
SCAN
MONI
#
SQL
REAR LOCK
IC-2710H.qxd 02.2.8 16:55 Page 70 (1,1)